• ARLKActive Leak Repair Kit™ is an easy-to-install compression seal system designed for active leaks up to 75 psi. It consists of a compression strap – suitable for operations handling water, harsh chemicals and high heat – combined with a resin fiberglass outer wrap that hardens around it, securing the strap in place and protecting it from mechanical damage.
  • Click here to review the technical data sheet. 


  • 1. Secure the leak with QuickStrap™
    1_5Thumb
    Starting opposite the leak, apply QuickStrap™ tightly around the pipe, layer over layer. Then, secure the end with tape.

    2. Prepare the Pipe Surface
    2_6Thumb
    ?Mark and abrade the surface to provide an anchor pattern. Solvent wipe the surface and allow the solvent to flash off.

    3. Apply Pipe Wrap® and Topcoat
    3_2Thumb
    Remove Pipe Wrap® from the foil pouch and immerse in water to activate the resin. Apply provided Pipe Wrap® using the cigar wrap method. A topcoat may be applied after two hours.

Security Code:
security code
Please enter the security code:

Submit

Share This: