air pollution control

The services offered by Centra Rekayasa Enviro in this area for handling gaseous emissions over particulate matter and pollutants like SO2, HCl, HF, Hydrocarbons, Mercaptans, H2S, Cl2, Oxides of Nitrogen, Acid Mists, Fine Aerosols etc.

Type of Air Pollution Control that we can design, fabricate and install includes:


Scrubber systems are a diverse group of air pollution control devices that can be used to remove some particulates and/or gases from industrial exhaust streams. “Scrubber” is a pollution control device that use liquid to wash unwanted pollutants from a gas stream. Scrubbers are one of the primary devices that control gaseous emissions, especially acid gases, Fumes. Industrial Scrubbers can also be used for heat recovery from hot gases by flue gas condensation. Scrubber are used for scrubbing the obnoxious fumes such as silicon tetrafluride, HNO3, HCl, NH3, Phosphoric acid, super phosphate & Fluorine. Manufacturing using quality R.M these are available in various dimensions & specifications. As per the client requirement this system can also be used for recovery of the products.

Low Energy Scrubbers Application
Spray Scrubbers Coarse particulate matter removal and moderate removal efficiency for gaseous pollutants.
Wet Cyclonic Scrubbers Moderate/high particulate matter removal upto 5 microns
Vertical Baffled Scrubbers Moderate to high removal for scrubbers coarse particulate upto 3 microns & gaseous pollutants
Horizontal Baffled Spray Scrubbers High efficiency for gaseous pollutants.
Packed Bed Scrubbers High efficiency for gaseous pollutants.


High Energy Scrubbers Application
Venturi Scrubbers Very high efficiency for fine particulate with partial removal of gaseous pollutants.
Ejector Scrubbers Very high efficiency for coarse particulate and gaseous pollutants
3. High Efficiency Wet Filters Very high efficiency for fine particulate matter soluble in scrubbing liquid
Cleanable High Efficiency Air Filter For removal of aerosols P205, SO3, etc.
High Efficiency Air Filter For removal of sticky and oily particulates, aerosols and mists.


PT. Centra Rekayasa Enviro is one of the fabricator which provides air pollution control system from design, fabrication and installation. Please contact us at should you have any inquiries related with air pollution control (APC) system for your organization.

Share This: